Pipe Straps

Using Pipe Straps To Quiet Pipes

Pipe Straps
Banging, rattling or squeaking noises from water pipes does not necessarily mean that your pipes need changing. These noises from water pipes may indicate that the pressure of water flowing on the pipes is too high and that the air on the pipes is not enough to cushion the pressure. The noises may also be caused by the loosening of pipe straps. There are several things which you can do to decrease the noises of banging water pipes. You can fix the existing pipe straps which have loosened or place additional pipe straps. You can learn more techniques on how to reduce the noises when you contact an emergency plumber London.

What are pipe straps?

Before learning how you can apply pipe straps, it is important for you to know what they are and what they do. Pipe straps or technically known as pipe clamps. Pipe Straps are used in the installation of pipe lines for several purposes. They are mainly used to anchor the pipes on the surface where they are to be installed to prevent them from falling apart. They are also used to control the movement and vibration of the pipes as water pressure pushes towards the edges. Pipe straps may loosen when it is constantly subjected to high water pressure. It may also become less effective after it has been installed in the past several years. It is very important to maintain your pipe straps for you to avoid experiencing irritating sounds coming from pipe lines.

Where to find pipe straps

Pipe straps are available in several local stores which offer industrial supplies. They are also available in some online stores. However, you should be cautious especially when purchasing online. Purchase only from reputable selling sites to prevent getting ripped-off.
Prices of pipe straps may vary depending on the brand and the size. They can also be made from different materials such as plastic or metal. You can contract an emergency plumber London to know more about what type and size of pipe strap you must purchase.

How to install pipe straps

It is quite simple to install pipe straps if you know how to do it. Here are the tips on how to install pipe straps on your pipe lines.

  • Determine locations where heavy banging sounds are often heard. This is where you will apply additional pipe straps.
  • You can also choose to apply pipe straps every 8 to 10 feet on vertical pipe lines and every 6 to 8 feet for horizontal pipes.
  • Make sure that the bolts are complete when you purchase.
  • Install the pipe straps using the metal clamps. Make sure to tighten the bolts.
  • You can also apply insulating plastic pipes for further protection.

Pipe straps can also be applied by plumbers. You just have to contract them and schedule for an appointment. Along with installing pipe straps, you can also avoid noisy pipes by closing your faucet slowly. In this way, the amount of air in the pipes can be regulated. To know more about pipe straps, you can contact your local plumber.

Related Article Below: